Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Mixing Plastics

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

TripodBob

Post subject: Mixing Plastics

Posted: Mon Oct 23, 2023 9:43 am

Mahogany

Joined: Sat Jun 11, 2011 1:58 pm
Posts: 51
First name: Rob
Last Name: Roither
City: Williamsburg
State: Virginia
Zip/Postal Code: 23188
Country: USA
Focus: Build
Status: Amateur

My previous guitars have all been done with ABS binding and pfurlings from LMI. Now with their limited stock I'm forced to mix ABS and PVC if I want to continue my usual design. Any thoughts on mixing ABS and PVC?

Top

RusRob

Post subject: Re: Mixing Plastics

Posted: Mon Oct 23, 2023 2:18 pm

Contributing Member

Joined: Tue Mar 19, 2013 3:34 pm
Posts: 1097
First name: Bob
Last Name: Russell
State: Michigan USA
Focus: Repair
Status: Semi-pro

I have never tried it and I would be hesitant to say it would work. I have done a number of binding using ABS but have not tried mixing them.

I know from working on plumbing it is a no-go to glue ABS and PVC and under code you must have mechanical connection. The joint will fail.

Maybe someone here has experience with mixing the two but I wouldn't think they will stick together.

Otherwise you might go with ABS and that wood-like fiber stuff that is dyed

Cheers,
Bob

Top

Barry Daniels

Post subject: Re: Mixing Plastics

Posted: Mon Oct 23, 2023 4:08 pm

Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3269
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels

If you use CA then it would probably work. Test on scrap.

Also, abrading the surfaces of the plastic with sandpaper will always help with mechanical adhesion.

Top

Jim Watts

Post subject: Re: Mixing Plastics

Posted: Mon Oct 23, 2023 5:36 pm

Contributing Member

Joined: Thu May 12, 2005 5:46 am
Posts: 2986
Location: United States

I’m guessing they would also age differently down the road, if that’s a concern, but don’t really know.

_________________
Jim Watts
http://jameswattsguitars.com

Top

Page 1 of 1

[ 4 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: mikeyb2 and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: